Industrial Personal Computer--IPC is a kind of reinforced enhanced personal computer. Generally speaking, it is a computer specially designed for the industrial site, which can be operated reliably as an industrial controller in the industrial environment. Its main structure and working principle are the same as those of an ordinary computer.

Industrial computer assembly is a fine work, it is easy to error in the installation process, so you need to be particularly careful, and pay attention to the following problems.

1、Check whether the hardware and tools are complete. Check the prepared hardware and tools, to see whether they are complete, you can follow the installation process to discharge the hardware in sequence, and carefully read the instructions of the motherboard and related parts, to see if there is a special description. In addition, the hardware must be placed in a flat, safe place, to prevent hardware scratches, or falling from high places and other phenomena.

2、Prevent electrostatic damage electronic components in the process of assembly control machine, to prevent the human body with electrostatic damage to electronic components. Before the installation, you need to eliminate the static electricity brought by the human body. You can wash your hands with flowing tap water, and your hands can touch the water pipe, heating pipe and other grounded metal objects, and of course, you can also wear anti-static gloves and anti-static wrist band.

3、Prevent liquid immersion circuit will be water cups, drinks and other liquid vessels open, away from the work table, so as to avoid liquid into the motherboard, causing short circuit, especially in the summer work, to prevent sweat dripping. In addition, the working environment must be kept dry, ventilated, and can not be assembled in a wet place.

4、Light take light put accessories can not be forcibly installed, to take light put accessories, so as not to cause deformation or breaking of accessories.

Assembly process:

1、Prepare the accessories and tools needed for assembling the industrial control machine, and release the static electricity from the body.

2、Installation of the motherboard and its components. Install the CPU, cooling fan and memory bar on the motherboard in turn, and fix the motherboard in the chassis.

3、Install the power supply. Install the power supply into the chassis.

4、Fixed motherboard. Install the motherboard into the chassis.

5、Install the hard disk to install the hard disk into the chassis and connect their power and data cables.

6、Install the graphics card and insert the graphics card into the motherboard slot, and attach it to the chassis.

7、Main board wiring connects the power switch control cable, hard disk indicator light control line, USB connection cable and audio cable in front of the chassis control panel to the main board.

8、Connection of the external devices. The keyboard, mouse, monitor and speaker are connected to the main host.

9、Detection after assembly. Check that each hardware is installed correctly.

How should we judge the quality of the IPC motherboard?

1、The mainboard with materials 

According to the common sense, the number of power supply phases on the motherboard can be very clearly seen, but the capacitor used by the motherboard, inductance are also different, in the actual use, the efficiency will be different. Distinguish each kind of capacitor, inductor grade, is a more complex system engineering, without a very long article and a large number of pictures is difficult to say clearly. 

Therefore, it can only be identified through simple methods: good products will be better in appearance, low cost, general quality products, in the appearance is not very concerned about, therefore, the simplest way to distinguish is to distinguish from the appearance. 

From the capacitor many times, whether to use all solid capacitor has become a standard to judge whether a motherboard is good motherboard. Have certain truth, but also not absolute, because in addition to the CPU power supply unit current, high calorific value part, other parts on the motherboard using solid capacitor is not necessary, do not need to pursue all solid capacitor materials and choose a higher price motherboard, unless the price gap is not big, and feel the value for money.

2、The main board workmanship

As the saying goes, people rely on clothes, Buddha depends on gold! External workmanship for its evaluation is also very important, rough workmanship will only give our motherboard minus points.

When observing the work of the motherboard, we can directly investigate one of the motherboard, because of the work of the motherboard problems, it will be very common in the other same batch of the motherboard. When buying the motherboard, we have to check it in details.motherboard CPU, power supply unit, motherboard memory slot part, motherboard disk interface part, motherboard expansion slot part and other details need to be carefully checked, such as whether the components on the motherboard are arranged neatly, whether the position on the motherboard is right and so on.

3、Easy to use

Ease of use refers to whether it is easy to use on the motherboard layout. Whether the design layout of PCI-E slot latch, PCI-E buckle design, SATA interface, power supply slot and so on is reasonable, whether the design will affect the use after a long time in the future and so on. In the layout of the motherboard is not the more the interface and expansion slot is not the better, but suitable for their own is the best, because the redundant interface may be meaningless for themselves.

TAICENN is a leading global provider and manufacturer of industrial panel PC, industrial display and industrial& embedded PC products, which are designed specifically for systems and applications that require excellent performance, high-level reliability and stability, long supply period and supports.